IO5-D/c Inline Module 5MT Series D |
||||||||||||||||||
![]() |
||||||||||||||||||
|
||||||||||||||||||
Input Output Module for multitrack recording and mixing with 2 automated faders, 5 Band EQ with Split function, compressor expander dynamics section and 10 sends.
The IO5 D/c is the most important input channel of the series D mixing consoles. It offers many comfortable features for music recording and mixing. All modules have a very high quality mic preamp with transformer balanced input, ultra low noise (noise figure is below 1.5 dB) and 70 dB maximum gain. Features: Very high quality mic preamp with transformer balanced input, very low noise (noise figure below 1.5 dB) and 70 dB maximum gain Tape return input and additional line input for keyboards and external exquipment. 5-Band EQ with 3 fully parametric Bands and +/- 20 dB gain range. The 3 overlapping, fully parametrics cover the entire audio range. The Split Function makes it possible to use the 5 EQ bands as 2 EQ's in the Tape/Monitor Chain and the Record Chain at a time. Two automated faders, 100 mm and 65 mm, with LED bar that indicates the VCA position next to the fader. 10 Sends, 6 mono aux sends with separate 'to REC' switches and a pre fader switch per pair, stereo CUE send with switch set and Extention Send that can be used either dual mono or stereo. Extention send can be alternatively used to use the 24 bus routing for additional 'floating' aux sends. Compressor Expander Dynamics section with gain reduction led chain, full set of controls and autogain circuitry Audio Subgrouping possible in many ways. The 24 bus routing can be used for audio sub grouping. Any input can be used as sub group master. Full routing set to modify the assignment of the processing stages of the module. Input reverse and fader reverse, separate PFL, peak/present indicators and solo in place logic for each fader. |
||||||||||||||||||
![]() |
||||||||||||||||||
|
||||||||||||||||||