|You are here: HOME-PRODUCTS-INTEGRATOR-MIX2|
|IN DETAIL FRONT-ENDS PROCESSING MIXING 1 MIXING 2 CONTROL-ROOM MODULES ACCESSORIES HISTORY FAQ's|
|MODULES: PREAMPS EQUALIZERS/MS DYNAMICS MIXING CONTROL-ROOM METERS-FADERS INDEX INDEX-DATA|
|THE INTEGRATOR MIXING FRAME||THE C41 CASCADE MODULE|
|While the C41 Cascade fits into the standard 4U high frames, the INTEGRATOR MIXING SYSTEM
is a separate set of 6U high modules and a special fader frame. Depending on the selection of the master module, the output of the system is 5.1 or stereo.
There are mono and stereo input modules for both of the versions, stereo and 5.1 and an additional 5.1 in 5.1 line input module. Every module fits into each slot of the frame.
Besides the stereo or 5.1 masters, there are two mono and one stereo send, a PFL system, and a separate Solo in Place system. All the mono and stereo input channels have gain controls and a balanced, switched insert. A Cut/Channel On control, a post fader output, and a TO-MIX switch is a matter of course. Every input module has a peak meter with 4 LED's and a range of +/- 20 dB.
|The C41 Cascade Module is an expandable mixer unit with 4 stereo inputs, a stereo expansion input with an enable control and a stereo master. The stereo inputs of the device can be used as mono inputs as well|
|An INTEGRATOR Mixing Frame, 5.1 Surround Version with 6 Mono Input Modules,
1 Stereo Input Module, 1 5.1 Input Module and the 5.1 Master Unit
|The mixing frame houses 8 input modules and the master module. EXPANSION is easily possible at any time by another fader frame that can hold up to 9 additional input modules and a couple unit. The couple unit contains everything that is needed to doch the additional frame to the main frame and provides another expansion input for the next frame. With this principle, the number of frames is not limited. You can arrange as much channels as you like. Start with one frame and a couple of inputs and upgrade the system by adding inputs and frames at any time.
Control room selection and regulation, talkback, playback, metering and all the other functions can be integrated by adding the relevant cassette modules to the system. See the CONTROL ROOM module page for details.
In addition to the Integrator mixing systems based on standard modules we can arrange special constellations meeting your needs. Such a console can have as much channels as you want and all the features that you desire.
A custom Integrator Console uses input and processing modules in combinations with special fader and distribution cassettes. These cassettes contain the routing system with up to 48 busses, the panorama section for stereo or 5.1, the sends and the signal switches. Up to 16 sends can be implemented. Of course, all the master functions, control room and playback / talkback features can be integrated as well as any kind of metering and a patch bay. An automation system can be implemented.
The harness of such a console can be up to 4.5 meters wide. Producer tables and remote areas for your keyboard, trackball, and mouse can be integrated. The arrangement of the modules depends on your ideas.
Of course, a custom Integrator Console is not necessarily 3 meters wide. We can make any arrangement of modules for any purpose - small or large.
As such a console is customized, we need you, the customer, to tell us what you like to have. You do need to do this in a very detailed form. Let us just know what basic features you would like to have and what you special requirements are. Based on this information we work out a first quotation, that serves as a basis for the discussion about the details of execution. You are welcome to let us know, what you desire.