You are here: HOME-PRODUCTS-INTEGRATOR-MIX
BACK SURROUND TOOLKIT INTEGRATOR V700 5MT SYSTEM  MAGNUM-V3 LIVE BROADCAST CONTACT 
 MAIN PAGE PROCESSING-FRAMES MIXING-FRAMES MODULE-HOUSINGS TECHNICAL DATA ACCESSORIES HISTORY
  MODULES APPLICATIONS FRONT-ENDS PROCESSING MIXING 1 MIXING 2 CONTROL-ROOM LIVE-SOUND FAQ's

Front View of 4U Frame with a set of audio modules Integrator Frames

  
The frames for pre amplifiers and processing modules are available in 3U and 4U high versions for modules of the respective size. Fader frames are 6U high frame units that can be installed in either a rack or a table.



Frames for Processing Modules and Pre Amplifiers

The frames for pre amplifiers and processing modules are available in 3U and 4U high versions. The 4U high frames are available in two basic versions. All modules have standardized connection allocations. The frame wiring is always laid out for the installation of both mono and stereo modules and will house up to 9 audio modules. All inputs and outputs are on XLR connectors. In addition, the connections of modules 1 to 8 are simultaneously available on 25 pin, D-Sub connectors.
Rear View of the 4HE/s frame
The 4HE/s Frame is laid out for the installation of any 4U high Integrator module with mono or stereo input and output. In addition to eight normal sized modules, one 1.5 space wide special module can also be fitted into slot 9 of all frames. Slot 9 has additional connectors that are needed for control-room modules, C41 Cascade mixing devices, select units, and other devices that need the additional I/O connectors. See the technical data sheet of the specific module for details.

The 4HE/e Frame is laid out for the installation of any module version without limitations. This version is needed, if you want to install not only input and processing devices in mono or stereo versions but also the modules mentioned above in any of the nine slots. With the 4HE/e version, the EXT-I/O and EXT-Ctrl connectors are only installed on slot 9.
Custom housings, including special mounting frames for larger systems or complete consoles based on the Integrator modules can be supplied. Just let us know what you need, and how you would like it configured and we will provide a detailed quoatation.
the Connector Panel of the Integrator 4U/e Frame
As extended I/O connections are not needed with the 3U devices, there is only one frame version necessary. The wiring of the 4HE frame is identical to the 4HE/s frame, however, due to the lack available space, the parallel wiring for slot 1 to 8 on 25 pin, D-Sub is not installed.
a detailed View of the Connectors of Slot 9, Power and Ground All the frames are available as 19-inch versions. In addition, tabletop versions with 2, 4 and 6 slots are available.

Audio Connectors
There are two XLR input and two XLR output connectors for each module slot located on the back of the frame. In addition, there is a SubD-25 Connector with eight additional audio lines and a SubD-9 connector for control inputs and outputs. The XLR connectors are always used for the main audio inputs and outputs. The use of the eight additional audio lines on the EXT I/O SubD-25 connector depends on the module version that is installed. Apart from the 4HE/s version, therse additional connectors only exist on slot 9 of the frames. The control connector is used for remote controls and configurations with certain module versions. Alternatively, it Power Supply Connectors and Ground Bridges can be used for additional audio lines.

Power Connectors and Grounding
External power supply units offering different capacitites are available. Multi-frame assemblies, utilizing only one power supply unit is also possible with the addition of a power connector module in each frame. The power supply is connected to the fader frame that contains the master connector module. All the other frames in the system are connected in series to this frame. An optional power distributor can also be used wihich will facilitate the connection of up to 10 frames to a single power supply. Shorting plugs can bridge the separately wired electrical grounds.
MODULES: PREAMPS EQUALIZERS/MS DYNAMICS MIXING CONTROL-ROOM METERS-FADERS INDEX INDEX-DATA