|You are here: HOME-PRODUCTS-INTEGRATOR-MIX|
|IN DETAIL FRONT-ENDS PROCESSING MIXING 1 MIXING 2 CONTROL-ROOM MODULES ACCESSORIES HISTORY FAQ's|
|MODULES: PREAMPS EQUALIZERS/MS DYNAMICS MIXING CONTROL-ROOM METERS-FADERS INDEX INDEX-DATA|
|INTEGRATOR offers 3 different ways to build up mixers:|
|The C41 CASCADE MODULE||THE INTEGRATOR MIXING FRAME||THE CUSTOMIZED INTEGRATOR CONSOLE|
|The C41 Cascade Module is an expandable mixer unit with 4 stereo inputs, a stereo expansion input with an enable control and a stereo master. The stereo inputs of the device can be used as mono inputs as well||While the C41 Cascade fits into the standard 4U high frames, the INTEGRATOR MIXING SYSTEM
is a separate set of 6U high modules and a special fader frame
|In addition to the Integrator mixing systems based on standard modules we can arrange special constellations meeting your needs.|
|A complete Stereo Adder/Mixer with 32 Stereo Inputs in a 4U high Frame, using 8 C41 Modules and an I38 Master Fader|
|The C41 fits into every 4U high frame in slot 9 and in every slot of the 4HE/e frame versions.
The expansion capabilities of the Cascade system are not limited. You can add as much modules as you like to build up a multi channel system. As the expansion can be enabled and disabled per module, it is very easy to change the structure of the system. Instead of using 8 C41 modules as a 32 Stereo into Stereo system you can easily change the same module into 8 4 Stereo into Stereo configurations or anything in between. Or course, it is also possible to use one or more C41's as a group master for the outputs of C41's that are used as premixers.
As the C41 fits into the same frames that are used for most of the preamplifier and processing devices, it is very easy to upgrade an existing front-end or processing frame with some free slots with a mixer. If there is a need for more channels, you can just add additional C41's. It does not matter if the additional cassettes are placed in the same frame - expansion is also possible between different frames.
|4 Slots of a 4U high Frame, with an 8 Stereo Input Mixer, Control Room Select and Control Room Regulator Units|
|A combined Frame with a 20 Stereo Input Adder/Mixer, an I38 Master Fader, a Control Room Select Unit I26, Peakmeter I12 and Control Room Unit I61b - a compact Mix and Control Center|
|The C41 module has calibrated 0 dB positions for the level control and a calibrated center position for the pan. You can therefore use the modules for a simple adding function, where you set the levels inside the DAW or as a real mixer using the tonal advantage of the highest available D/A converter level.
An additional master fader, a meter and of course a complete control room regulator and talkback section can be integrated as part of the entire system just by plugging in the relevant cassette modules. See the CONTROL-ROOM modules page for details.