Technical Data Surround Module Mono I67
HOME INDEX CLOSE
Technical Data SURROUND MODULE MONO I67
Version 6HE Cassette


Input Line-In 1 + 2 + Insert In - Standard Version
Type electronically balanced
nominal Level + 6 dBu
maximum Level1) ƒ ³ 40 Hz ³ + 30 dBu - Gain
Input Impedance ƒ 40 Hz - 15kHz ³ 10 kW
CMRR ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT
Input optional Version with external Transformers
Type balanced floating, Transformer
nominal Level + 6 dBu ± Gain
maximum Level1) ƒ ³ 40 Hz ³ + 30 dBu - Gain
Input Impedance ƒ 40 Hz - 15kHz ³ 10 kW
CMRR ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT


Output Direct-Out + Insert Out Standard Version
Type electronically balanced
nominal Level + 6 dBu
maximum Level1) ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu
³ + 22 dBu with unbalanced Load
Source Impedance ƒ 40 Hz - 15 kHz £ 60 W
Load Resistor ³ 1200 W for + 30 dBu ³ 600 W for + 27 dBu
CMRR ƒ 40 Hz - 15 kHz ³ 40 dB according to IEC
Output optional Version with external Transformers
Type balanced floating, Transformer
nominal Level + 6 dBu
maximum Level1) ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu
Source Impedance ƒ 40 Hz - 15 kHz £ 60 W
Load Resistor ³ 1200 W for + 30 dBu ³ 600 W for + 27 dBu
CMRR ƒ £ 15 kHz ³ 40 dB according to IEC
CMRR ƒ £ 15 kHz ³ 60 dB according to IRT
Mixing Outputs for INTEGRATOR Bus Rails


Gain
INPUT GAIN ± 20 dB ± 1 dB - 0 dB ± 0.5 dB
at Center Detent
Fader + 10 dB ± 0.5 dB max, 0 dB ± 0.3 dB


Frequency Response ƒ 20 Hz - 20 kHz ± 0.25 dB
Phase Response
Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
Standard RF / Subsonic Filters


THD £ +22 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 %


Crosstalk
independend Signals ƒ 40 Hz - 15 kHz £ 85 dB
Fader Cut Off ƒ 40 Hz - 15 kHz £ 95 dB
Cut Off CH-On-Switch ƒ 40 Hz - 15 kHz £ 100 dB
Aux + Cue- Pot's ƒ 40 Hz - 15 kHz £ 70 dB
Pan-Pot's ƒ 40 Hz - 15 kHz £ 60 dB
Mix-Switch ƒ 40 Hz - 15 kHz £ 100 dB


Dynamic Range 1) 22Hz-22kHz RMS ³ 118 dB - (Gain - 10 dB)
Noise Level 1) 22Hz-22kHz RMS £-92 dBu + (Gain - 10 dB)


Size INTEGRATOR-Fader Module 6HE


Control Elements Potentiometer /P&G or Ko-On Fader 100 mm
Functions see Module Description


1) The value refers to the post fader output. The noise level of the master outputs depends on the number of input modules. The value stated above depends on the setting of the total gain that depends on the settings of input gain and fader and do not consider the noise levels of inserted devices. All measurement are made with a source resitor of 40 Ohms. The noise level is for gain upt to + 10 dB is -98 dBu - RMS, 22 Hz to 22 kHz and increases with the gain.