| Technical Specifications |
DENOISER MONO U788 |
| Size |
Mono in V700-Module 1N |
|
| Input |
|
| Type |
balanced, floating, torodial Transformer, or balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level 1) |
ƒ ³ 40 Hz ³ + 30 dBu |
| Input Impedance |
ƒ 40 Hz - 15kHz ³ 5 kW |
| CMRR |
ƒ 40 Hz - 15 kHz ³ 60 dB according to IRT |
|
| Output |
|
| Type |
balanced, floating, torodial Transformer, or balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu |
| Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
| Load Resistance |
³ 300 W |
| CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
| CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
| Gain 2) |
Denoiser inaktiv - 1 kHz 0 dB ± 0.5 dB |
|
| Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.25 dB |
| Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5/-20°
- with Standard Values for RF & LF Filters
|
|
| THD 3) |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
| Dynamic Range 2) |
Gain 0 dB / 22Hz-22kHz RMS ³ 122 dB |
| Noise Level 2) |
Gain 0 dB / 22Hz-22kHz RMS £-92 dBu |
|
| Size |
V700-Module - StandardSize |
| Frame |
fits into Standard Frames |
|
| Control Elements |
Stepper Pots - 21 Steps |
| Denoiser |
|
| Threshold |
-70 dBu ... -30 dBu |
| Attack |
fixed 0.1 ms |
| Release |
60 ms ... 1.5 s |
| FilterFrequency |
depending on Level 6 kHz to 200 Hz |
| Anzeige |
Filter Frequency with 8 LEDs |
|
- 1)
- Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output.
|
|
|
|
|
- 3)
- The settings and the signal frequency can affect the THD values. The values refer to inactive regulation.
|
|
| Index |
Home V700 Home |