| Technical Specifications |
NIVEAU-FILTER with HI-EQ + EEQ W795 |
| Size |
V700-Module 1N |
|
| Input |
stereo |
| Type |
balanced, floating, torodial Transformer, or balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu |
| Input Impedance |
ƒ 40 Hz - 15kHz ³ 5 kW |
| CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
| Output |
stereo |
| Type |
balanced, floating, torodial Transformer, or balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu |
| Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
| Load Resistance |
³ 300 W |
| CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
| CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
| Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
| Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.5 dB |
| Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- with Standard Values for RF & LF Filters
|
|
| THD |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
| Dynamic Range 2) |
22Hz-22kHz RMS ³ 120 dB |
| Noise Level 2) |
22Hz-22kHz RMS £-90 dBu |
|
| Crosstalk |
L <> R ƒ 40 Hz - 15 kHz £ - 70 dB |
|
| Size |
V700 Standard Module Size, standard Depth |
| Frame |
fits into Standard Frames |
|
| Control Elements |
- Stepper Pot
|
| HI-Boost/Cut Range |
± 16 dB ± 1 dB with Center Detent at 0 dB |
| Frequency HI |
10, 12.5, 16, 20 or 25 kHz |
| Charakteristics HI |
Baxandall-Filter |
|
| Niveau Boost/Cut |
± 16 dB ± 1 dB with Center Detent at 0 dB |
| Characteristics |
- synchronous Boost and Cut
- of High and Low with Baxandall Characteristics
- neutral Frequency 800 Hz
|
| Niveau Balance |
± 16 dB ± 1 dB with Center Detent at 0 dB |
| Characteristics |
- counterrotating Boost and Cut
- of High and Low with Baxandall Characteristics
- neutral Frequency 800 Hz
|
|
| Elliptischer EQ |
- Frequency depending Crosstalk with Scaling for 15 dB Crosstalk left and right
|
| Control Range |
25 Hz to 2 kHz |
| Characteristics |
- Reduction of Crosstalk
- with 6 dB per Octave
|
|
| Bypass |
- single Bypass-Switches for HI-EQ, Niveau-Filter and Elliptic-EQ
|
|
| 1) |
Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output. |
|
| 2) |
The values refer to precisely linear setting of all parameters. |
|
| Index |
Home V700 Home |