Technical Specifications |
5.1-MONITOR CONTROLLER W762 |
Size |
V700-Module 1N |
|
Input |
6-Channel |
Type |
balanced |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 25 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
Output |
6-Channel |
Type |
balanced |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 26 dBu |
Source Impedance |
ƒ 40 Hz - 15 kHz £ 60 W |
Load Resistance |
³ 600 W |
CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
Frequency Response |
ƒ 20 Hz - 20 kHz ± 0.5 dB |
Phase Response |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- with Standard Values for RF & LF Filters
|
|
THD |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
Dynamic Range |
22Hz-22kHz RMS ³ 120 dB |
Noise Level |
22Hz-22kHz RMS £-90 dBu |
|
Crosstalk |
between arbitrary Channels
ƒ 40 Hz - 15 kHz £ -70 dB |
|
Size |
V700 Standard Module Size, standard Depth |
Frame |
- for Console & Custom Frames only
|
|
Control Elements |
Stepper Switches / Stepper Pots
|
- Volume Control
|
- 21 Steps from Off to 92 dB-SPL
- Gain at 92 dB-SPL 0 dB ± 0.25 dB
- without Matrix Stages or Direction Controls
|
4-CH-Matrix |
- adds LFE with 80 Hz Filter to L, R and C,
- adjustable Level, Function Selected by Jumper
- SL and SR added to S with 3 or 6 dB
|
|
Downmix-Matrix |
- adds LS to RS to R with 0, 3, 6 dB
- alternatively switched off
- adds C to L and R with 0, 3, 4.5, 6 dB
- adds LFE with 80 Hz Filter to L, R, C
- adjustable Level, Function Selected by Jumper
|
PFL |
- activated by Push Button or by Remote Control Voltage, isolated by Opto Coupler 9 to 30 V
- additional, balanced Input
- Level Control
|
DIM |
- Control Range from 10 to 30 dB
- activated by Push Button or by Remote Control Voltage, isolated by Opto Coupler
|
|
Decoder |
passive Relay Switching of external Decoder |
Mono Matrix |
internal selection for 3 dB and 6 dB operation schaltbar |
L-R Reversal |
by Push Button L<>R for L and LS with R and RS
|
Phase Reversal |
im rechten Channel durch Push Button ØR |
4CH |
switches to 4 Channel Mode |
Stereo |
switches to Stereo-Mode |
Mute |
all Outpus muted by Push Button CUT |
single Channles |
Cut Switches per Channel |
2. Monitor System |
Stereo, passive Selection by Push Button ALT |
|
|
1) |
Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output. |
|
2) |
Refers to linear adjustment of all parameters |
|
Index |
Home V700 Home |