Technical Specifications |
MS MATRIX with MS EQ W731 |
Size |
V700-Module 1N |
|
Input |
stereo |
Type |
balanced, floating, torodial Transformer, or balanced, grounded |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 5 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
Output |
stereo |
Type |
balanced, floating, torodial Transformer, or balanced, grounded |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu |
Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
Load Resistance |
³ 300 W |
CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.5 dB |
Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- with Standard Values for RF & LF Filters
|
|
THD |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
Dynamic Range 2) |
22Hz-22kHz RMS ³ 120 dB |
Noise Level 2) |
22Hz-22kHz RMS £-90 dBu |
|
Crosstalk 2) |
MS-Crosstalk ƒ 40 Hz - 15 kHz £ -40 dB |
|
Size |
V700 Standard Module Size, standard Depth |
Frame |
fits into Standard Frames |
|
Control Elements |
Stepper Pots
|
- Direction Controller
|
- independent Selection for LR or MS Mode for Input and Output
|
Base Width |
0 to 300 % with calibrated 100 % Position
Mastering Version - 0 to 150 % |
Direction |
- Mono von rechts über Stereo normal to
- Mono von links
|
|
MS-EQ |
- 3 EQ-Band in the MS-Chain
- LOW-Band in M-Channel
- MID- and HI-Band in S-Channel
|
Control Range |
± 15 dB per Band max
Versions with ± 10 dB and ± 6 dB available |
Frequency Ranges |
- LOW 20 Hz to 1 kHz
- MID 500 Hz to 22 kHz
- HI Shelf 4 kHz to 30 kHz
|
Q-Factor |
Low and Mid 2 Octaves to a Third |
|
Elliptischer EQ |
- Control of frequency depending Crosstalk with Scaling for 15 dB Crosstalk between left and right
|
Control Range |
31.5 Hz to 3.15 kHz |
Characteristics |
- Crosstalk
- with 6 dB per Octave
|
|
Bypass |
Bypass-Schalter for Dir-Mix and EQ
|
|
1) |
Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output. |
|
2) |
Refers to linear adjustment of all parameters ohne EQ |
|
Index |
Home V700 Home |