| Technical Specifications |
HARMONICS DISTORTION GENERATOR U794 |
| Size |
Stereo in V700-Module 1N |
|
| Input |
|
| Type |
balanced, floating, torodial Transformer, or balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu |
| Input Impedance |
ƒ 40 Hz - 15kHz ³ 5 kW |
| CMRR |
ƒ 40 Hz - 15 kHz ³ 60 dB according to IRT |
|
| Output |
|
| Type |
balanced, floating, torodial Transformer, or balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu |
| Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
| Load Resistance |
³ 300 W |
| CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
| CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
| Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
| Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.25 dB |
| Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5/-20°
- with Standard Values for RF & LF Filters
|
|
| THD 3) |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
| Crosstalk |
L-R, ƒ 40 Hz - 15 kHz £ 70 dB |
|
| Dynamic Range 2) |
Gain 0 dB / 22Hz-22kHz RMS ³ 120 dB |
| Noise Level 2) |
Gain 0 dB / 22Hz-22kHz RMS £-90 dBu |
|
| Size |
V700-Module - StandardSize |
| Frame |
fits into Standard Frames |
|
| Control Elements |
Stepper Pots - 21 Steps |
| Generatoren |
|
| K2 |
Generation of k2 (2nd Harmonics) |
| K3 |
Generation of k2 (3rd Harmonics) |
| Mixing |
0 to 10 % Distortion, in phase, or reversed |
| Filter |
-
|
| LPF, each |
- 22 kHz to 2 kHz,
- switchable to 2.2 kHz to 0.2 kHzs
|
| HPF, each |
- 30 Hz to 300 Hz
- switchable to 300 Hz to 3 kHz
|
|
- 1)
- Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output.
|
|
- 2)
- all Distortion Mix Control inactive (ADD-K2 and ADD-K3 at 0)
|
|
- 3)
- The purpose of this unit is the generation of harmonics distortion. It is self evident that these values are valid for inactive setting of the k2/k3 mix controls.
- (ADD-K2 and ADD-K3 at 0)
|
|
| Index |
Home V700 Home |