| Technical Specifications |
4 BAND STEREO SIDE CHAIN EQUALIZER W799 |
| Size |
Stereo in V700 Module 1N |
|
| Input |
|
| Type |
balanced, grounded |
| nominal Level |
+6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu |
| Input Impedance |
ƒ 40 Hz - 15kHz ³ 5 kW |
| CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
| Output |
|
| Type |
balanced, grounded |
| nominal Level |
+ 6 dBu |
| maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu |
| Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
| Load Resistance |
³ 1200 W |
| CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
| CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
| Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
| Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.75 dB |
| Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- with Standard Values for RF & LF Filters
|
|
| THD |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 % |
|
| Dynamic Range 2) |
22Hz-22kHz RMS ³ 120 dB |
| Noise Level 2) |
22Hz-22kHz RMS £-90 dBu |
|
| Crosstalk |
L <> R ƒ 40 Hz - 15 kHz £ - 70 dB |
|
| Size |
V700 Module, standard Depth |
| Frame |
fits into Standard Frames |
|
| Control Elements |
Stepper Pot
|
| Boost/Cut Range |
± 10 dB ± 1 dB with Center Detent at 0 dB
Boost/Cut direction reversed for using in the side chain of a stereo compressor |
| Frequency HI |
- sweeped Shelving Filter
- 4 kHz to 25 kHz
|
| Frequency MID2 |
200 Hz to 20 kHz ± 10 % |
| Frequency MID1 |
60 Hz to 6 kHz ± 10 % |
| Frequency LOW |
sweeped Shelving Filter
15 Hz to 500 Hz |
| Q-Factor |
for MID1 and MID 2 > 3 Octaves to a Third |
| Bypass |
with Push Button EQ-ON
|
|
| 1) |
Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output. |
|
| 2) |
The values refer to precisely linear setting of all parameters. |
|
| Index |
Home V700 Home |