Technical Specifications |
5-BAND-MS-EQ W785MS
FOR EXTENSION OF MS MATRIX W731 |
Size |
V700 Module 1N |
|
Input |
|
Type |
adapted to the Inser I/O of the
W731 M/S Matrix |
nominal Level |
+6 dBu |
maximum Level1) |
ƒ ³ 40 Hz ³ + 30 dBu
combined with W731 |
Input Impedance |
ƒ 40 Hz - 15kHz ³ 20 kW |
CMRR |
ƒ 40 Hz £ 15 kHz ³ 60 dB according to IRT |
|
Output |
|
Type |
adapted to the Inser I/O of the
W731 M/S Matrix |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 40 Hz, kges 1 % ³ + 30 dBu
combined with W731 |
Source Impedance |
ƒ 40 Hz - 15 kHz £ 40 W |
Load Resistance |
³ 2 kW |
CMRR |
ƒ £ 15 kHz ³ 40 dB according to IEC |
CMRR |
ƒ £ 15 kHz ³ 60 dB according to IRT |
|
Gain 2) |
all Controls at 0 dB Position 1 kHz 0 dB ± 0.5 dB |
|
Frequency Response 2) |
ƒ 20 Hz - 20 kHz ± 0.75 dB |
Phase Response 2) |
- Input/Output ƒ 40 Hz - 15 kHz £ +5°/-20°
- with Standard Values for RF & LF Filters
|
|
THD |
£ +26 dBu, ƒ ³ 40 Hz - 15 kHz, kges £ 0.1 %
combined with W731 |
|
Dynamic Range 2) |
22Hz-22kHz RMS ³ 120 dB |
Noise Level 2) |
22Hz-22kHz RMS £-90 dBu |
|
Size |
V700 Module, standard Depth |
Frame |
fits into Standard Frames |
|
Control Elements |
Stepper Pot
|
Boost/Cut Range |
± 10 dB ± 1 dB with Center Detent at 0 dB
- custom ranges possible |
Frequency HI |
- switchable 20 kHz Baxandall
- 12 kHz + 8 kHz soft bell/
4 kHz very soft bell
|
Frequency MID3 |
250 Hz to 25 kHz ± 10 % |
Frequency MID2 |
150 Hz to 15 kHz ± 10 % |
Frequency MID1 |
40 Hz to 4 kHz ± 10 % |
Frequency LOW |
20 Hz to 2 kHz ± 10 % |
Q-Factor |
fully parametric bands
> 3 Octaves to a Third |
Bypass |
with Push Button EQ-ON
|
|
1) |
Depending on the setting of the control, gain or attenuation is possible. The value is valid for the higher level at the input or output. |
|
2) |
The values refer to precisely linear setting of all parameters. |
|
Index |
Home V700 Home |