Technical
Specifications |
V700 STEM MIXING CONSOLES
5.1-INPUT MODULE M763 |
Size |
6U high Module x 1Slot |
|
|
Input |
Line-In 5.1 - Standard Version |
Type |
electronically balanced |
nominal Level |
+ 6 dBu |
maximum Level1) |
ƒ ³ 20 Hz ³ + 30 dBu - Gain |
Input Impedance |
ƒ 20 Hz - 20 kHz ³ 10 kW |
CMRR |
ƒ 20 Hz £ 20 kHz ³ 60 dB according to IRT |
Input |
optional Version with external Transformers |
Type |
balanced floating, Transformer |
nominal Level |
+ 6 dBu ± Gain |
maximum Level1) |
ƒ ³ 20 Hz ³ + 30 dBu - Gain |
Input Impedance |
ƒ 20 Hz - 20 kHz ³ 10 kW |
CMRR |
ƒ 20 Hz £ 20 kHz ³ 60 dB according to to IRT |
|
|
Output |
not existing |
Mixing Outputs |
for Stem Mixing Bus Rails |
|
|
Gain |
- LFE GAIN ± 10 dB ± 1 dB - 0 dB ± 0.5 dB
- at Center Detent
- Fader + 10 dB ± 0.5 dB max, 0 dB ± 0.3 dB
|
|
|
Frequency Response |
ƒ 20 Hz - 20 kHz ± 0.25 dB
Bandwidth < 10 Hz to > 200 kHz
Power Bandwidth 10 Hz to > 125 kHz |
Phase Response |
- Input/Output ƒ 20 Hz - 20 kHz kHz £ +5°/-15°
- Standard RF / Subsonic Filters
|
|
|
THD |
£ +28 dBu, ƒ ³ 20 Hz - 20 kHz, kges £ 0.1 % |
|
|
Crosstalk |
between any 5.1 channel ƒ 20 Hz - 20 kHz £ 70 dB |
Fader Cut Off |
ƒ 20 Hz - 20 kHz £ 95 dB |
CH-On-Switch |
ƒ 20 Hz - 20 kHz £ 100 dB |
Cue- Pot's |
ƒ 20 Hz - 20 kHz £ 70 dB |
Mix-Switch |
ƒ 20 Hz - 20 kHz £ 100 dB |
|
|
Dynamic Range 1) |
22Hz-22kHz RMS ³ 125 dB - (Gain 0 dB) |
Noise Level 1) |
22Hz-22kHz RMS £-95 dBu + (Gain 0 dB) |
|
|
Control Elements |
Potentiometer /P&G or Ko-On Fader 100 mm |
Functions |
see Module Description |
|
|
1) |
The value refers to the post fader output and the outputs to the bus rails. The noise level of the master outputs depends on the number of input modules. The value stated above depends on the setting of the total gain that depends on the settings of input gain and fader and does not consider the noise levels of inserted devices. All measurement are made with a source resistor of 40 ohms. |
|
Index |
Home V700 Home |